...
The Build is medium - not complicated and you don´t need special tools, a scope isn't required.
The most infos are described here: https://analogsweden.com/support
BOM (copy here) : SWEnigiser BOM public.xlsx
BOM notes: please read my Build tips - maybe you need some additional stuff.. (extra nuts, washers, gaffe tape, conductive tape) which isn't described in the official BOM
Buildguide (copy here): https://docs.google.com/document/d/e/2PACX-1vT6ixpvVsDYjM1PqPgLdzOc65GO3PApa-8_ZfttzhNT1LkMXzbI6MDWRsOo-P5VEh3SpZX4UKWi19R7/pub
...
Usermanual (copy here): swENIG-quickstart.pdf
DIY BUILD GUIDE ADDON /Support from me:
the biggest risk and challenge in this build:
Risks/Problems/Issues
| Issue ID | Date | Typ | Issue | Solution | affected version | Fixed version |
|---|---|---|---|---|---|---|
| 1 | 22.04.2023 | info/fix | the panel pcb is very close to the aluminum case - its easy to run in malfunctions and defects !! Since I built the RENIGISER, I know excactly how to fix it with a workaround. | use gaffa tape and put this on the case from inside , 2 layers are fine use additional washers on the potentiometers |
(or nuts) use at the rotary switches the nut or you can risk that the lock washer get loose, and you get more clearance/distance between the case and panel pcb DO NOT solder all cables |
thru the holes, just on top of the pads is fine. (as shown in my pictures) solder the potentiometers : add some solder on all pads !! then install the pots, use additional washers or nuts and then use nuts to fix they from outside - then solder the potentiometers. in this way you have enough space between the case and pcb with less risks. | release April 2023 | - | ||||
| 2 | 22.04.2023 | info/fix | the Upper pcb for the jacks: a lot of traces are under the jacks and at the tall trimmer, and if you press the jacks to close on the pcb, you can damage the PCB coating - get shorts and bleeds (same was on the TTSH project and many other projects)
 | use tape as shown in my picture and do make sure there's no mechanical stress on the jacks while soldering.
| release April 2023 | - |
| 3 | 22.04.2023 | build info | do not forget to install the Jumpers/bridges as described in the guide or you can't hear something | |||
| 4 | 22.04.2023 | BOM info | 1pf cap | use 3.3pf or do not install a cap.. works without too | ||
| 5 | 22.04.2023 | build info | diodes D9/D10 install this.. ( some clones and some originals dont have this.) | |||
| 6 | 22.04.2023 | info | in case you have hum - check the MIDI wiring | |||
| 7 | 22.04.2023 | info | please report bugs and infos here.. there's a comment function on this website |
PCB Pictures:
PCB Pictures assembled
...