Projecttitel: Balanced Driver
Status: DONE
Startdate: 03/2020
Duedate: 03/2020
Manufacture link: this page
Shop Link: diysynth.de - https://www.diysynth.de/pcbs-panels/Balanced-Driver-PCB.html
This Module was designed for my private usage, to install it in some Arp Clones like the TTSH or in old vintage gear.
the 6.3mm Connection is optional, the Signal output is at the TRS 3pol MTA header available for XLR Connections too.
the Circuit is Phantom power protected.
the benifits are symmetricial outputs with an bigger headroom and for situations with long cables or problems with EMV..
for TTSH Users: the TTSH isn´t a true Stereo Device, one of this PCB is fine for your TTSH.
BOM:
Download Version: balancer.xlsx
Mouser Project
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5113c803c
BOM Textversion 1.01 (same as above xlsx Version)
version 1.01 | Balanced Driver output. | ||||||||
March2020 | |||||||||
ID | Name | Designator | Footprint | Quantity | Manufacturer Part | Manufacturer | Supplier | Mouser | alternative |
1 | THAT1646PO8-U | U2 | DIP8 | 1 | Musikding, mouser | 887-1646P08-U | 594-K101J15C0GF53L2 | ||
2 | 100p | C6,C7 | RM2 | 2 | tme, mouser | 505-FKP0D001000BKSSD | |||
3 | FERRITE | L1,L2 | RM10 | 2 | 623-2743001112LF | ||||
4 | 100uF optional | C1 | RM2.5 | 1 | 100uF 35V 6.3*11 | ||||
5 | 100n | C4,C5 | RAD-0.1 | 2 | 594-K104K15X7RF53H5 | 81-RDE5C1H104J2K1H3B | |||
6 | 1N4001 - 1N4004 | D1,D2,D3,D4 | DO-41 | 4 | 621-1N4001 | ||||
7 | 10uf | C8,C9,C10,C2 | RM5 - RM2.5 fits too | 4 | nichigon or Wurth | 710-860020672010 | |||
8 | AMPHENOL ACJS-MHDR #888 | P2 | AMPHENOL ACJS-MHDR #88 | 1 | Amphenol | 523-ACJS-MHDR | |||
9 | MTA-100 header 2.54mm rak 3-pol | H1 | MTA-100 1X3 2.54MM | 1 | TE-Connect. | TE Connectivity | Electrokit | 640456-3 | |
10 | MTA100 header 5pol | CN1 | MTA-100-5V | 1 | TE-Connect. | 640456-5 | |||
11 | MTA 100 jack 5pol | CN1 jack | Rm2.54 | 1 | TE-Connect. | 3-641190-5 | |||
12 | MTA 100 jack 3pol | H1 for optional XLR connection | Rm2.54 | 1 | TE-Connect. | 3-640443-3 | |||
13 | IC socket 8pin milled | for U2 | 1 | 575-144308 | |||||
14 | screws, washer, nuts optional | ||||||||
note: you dont need the 6.3mm jack on the pcb | |||||||||
you can also use the TRS H1 header for jacks or XLR |