Project
Projecttitel:
Status: HIER ÄNDERN
Startdate:
Duedate:
Manufacture link:
https://www.muffwiggler.com/forum/viewtopic.php?t=203509&highlight=
ISSUES
Nr. | Description | Priority | |
---|---|---|---|
1 | Switches - use other pcbs footprint size and/or change panel to toggle switch | 1 | |
2 | BOM : LOG for Volume LFO and VP out gain | 3 | |
3 | missing mounting holes for pcbs | 2 | |
4 | LED driver needed for gate led | 2 | |
5 | leds polarity on pcb | 3 | |
6 | LFO speed inverted pot, left is fast on the prototype | 1 | Or use reveresed Poti |
7 | panel holes too big for potis | 1 | |
8 | powersupply design not allowed - | 2 | |
9 | markers for voltage test points missing | 3 | |
10 | more clearly infos about matched trannys and resistors | 3 | |
11 | envelope change too CEM3310 or digital | 1 | |
12 | capacitors are too close next to the power supply section on mainboard | 1 | |
13 | use bigger traces | 1 | |
14 | Gate signal bleed in LFO | 1 | Blocker |
15 | V/oct unstable - waveforms wobbling - | 1 | Blocker |
16 | Lfo led not working | 3 | |
17 | Holes in vcf board and VCO board to mount on metal spacers - for better mounting | 2 |
changes:
Pour R135 ---> 68pF
Pour R207 ---> 22nF
Switches
braucht: 1x 2 reihig mit 3 pins (ON/OFF) power
mouser | RS | ||
---|---|---|---|
power | SSSU022800 | ||
4x normal | SSSU015100 |
oder:
mouser | ordered | ||
---|---|---|---|
power | MHS222K nicht lieferbar | 06-MHS22204 | https://www.kynix.com/Detail/176774/MHS222K.html |
4x normal | MHS122Kapem | home stock | |
Nr | ||||
---|---|---|---|---|
Potis | 50€ | |||
buchsen | 30€ | |||
widerstände | 20€ | |||
capacitors | 2,2MF | reichelt | 3,40€ | |
ICS 3080, lm324, lmxxx | ||||
trannys, regler | 5 | |||
dioden | 1 | |||
schalter mouser | ||||
kabel | ||||
There are no images attached to this page. |