This page contains hi-res pictures of the build process. More will be added while build continues ...
for more details click on the picture, please respect the copyright - please ask before share on other websites, for private usage only.
PSU
You should bridge the connections for the choke, and reverse the dc in connector. (notice this is another connector, not the one stated in the BOM)
Mainboard
Preamplifier
Ringmod
VCO-1
VCO-2
VCO-3
VCO4027
VCF/Mixer
ADSR
AR
VCA
Mixer
Reverb
Amplifiers
S/H
Noise
Filtercards
4012 Filter
Notice the LM301 is soldered directly to the pcb. However you should use IC sockets.
There are 2 things to keep in mind:
- The BC558B needs to be mounted backwards (flat side of the transistor faces round side of the pcb print):
- You have to swap 2 pins of the 3958 - use insulation:
4072 Filtercard
