Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: RE-909Status:
Startdate: 10/2020Duedate: 02/20202022Updated: 27.April 2021Manufacture link: https://shop.re-303.com/build-it-2/Forum: http://23.235.199.139/~re303c5/forum/forum/11-re-909/ Shop: https://shop.re-303.com Facebook Group: https://www.facebook.com/groups/1657521224406039 |
...
ID | Issue | Fix | date | fixed version |
---|---|---|---|---|
1 | Snare Drum section - | please download v.1.7 build documentation for details. Service advisory: after building the snare you must place a jumper as shown in the pic below, this is shown without parts placed for clarify bigger picture from me - easier to find the place.. | 17.Dec.2020 | 1.9 build guide |
2 | C95/c97 Tom section | swap both against each other | 17 Dec. 2020 | 1.9 buid guide |
3 | Psu | if you‘re using the Safety PSU do not connect pin 27 and pin 28 on the F3 cable, otherwise you‘ll create a ground loop. | 17.dec. 2020 | 1.9 build guide |
4 | PSU - wrong routing → affects the memory | change the 5.6V zener as shown here: | 17.Dec. 2020 |
|
Tips:
ID | Focus | Info |
---|---|---|
1 | Wiring | You can use the MTA100 system from TE connectivity for example - |
2 | noisy/hiss | make sure to solder the potentiometer at all pins to have the correct ground - (the ground flow thru the outside pins / it act like a trace/bridge) |
3 |