Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: RE-808Status:
Startdate: 11/2021Duedate:08/12/2022Last Update: 17.Nov.2022Manufacture link: https://shop.re-303.com/product/re-808-bundle-3rd-run-advance-order/ |
...
Alps Switches Modding Guide v1.0.pdf
Placement guide:
RE-808_Component_Placement_Guide_v1.0.0.pdf
Issue List
ID | Issue | Fix | date | fixed version |
---|---|---|---|---|
1 | CPU mounting | As you can see you also need to do a jumper wire between the solder point marked A on the pixie cpu and pin 10 (!WE pin) of *any* of IC 7,8,9 or 10 (they’re all connected to the same signal) | 01/2022 | |
2 | PSU | Do not fit the DC jack on the PSU circuit board. Its not used and it is not wired correctly. use a cable for the jack as shown for example | 01/2022 | |
3 | Tactiles /caps install | heres a tip about the installation of the tactile caps: | 01/2022 | |
4 | MIDI WIRING | credits to a FB User.. | 11/2022 | |
5 | Silkscreen wrong | 11/2022 | ||
6 | Mainboard resistors | 11/2022 |