Projecttitel: Juergen Haible Living VCO in MOTM
Status: IN PLANNING
Startdate: Septmber 2014
Duedate: December 2014
Manufacture link:
Build thread on muffwiggler: for Eurorack pcb version
http://www.muffwiggler.com/forum/viewtopic.php?t=117137&highlight=living+vco
general lvco thread
http://www.muffwiggler.com/forum/viewtopic.php?t=93892&postdays=0&postorder=desc&start=130
http://www.baud-rate.com/blog/
known Issues for Eurorack pcb version from muffwiggler:
R39 use socket and try 820K to 1M
cut the socket on left side for using the tempco
for c7/c8 are film caps fine or bipolar electrolyt caps
BOM Core PCB:
BOM Driver PCB:
Living-VCO-Driver-BoM-v1.1.pdf
10K Poti for Frontpanel with vernier dials http://www.reichelt.de/534-10K/3/index.html?&ACTION=3&LA=446&ARTICLE=2543&artnr=534-10K&SEARCH=+53+4-10k
The calibration can be found here:
http://www.jhaible.com/living_vcos/jh_living_vcos.html -> link broken
check the legacy page: http://www.jhaible.info/wsdindex.html
Waveshaper adds SIN, TRI:
from: http://electro-music.com/forum/topic-30749-275.html
living_vco_waveshaper_stripboard_211.pdf
please add 22uF electrolyt caps and 100nF decoupling caps
Frontpanel:
JHLivingVCO1.fpd in MOTMwith RED circles (shown on picture)
JHLivingVCO1_wo_red_wo_square.fpd without SQUARE, without RED circle, without switch
JHLivingVCO1_wo_red.fpd in MOTM without red circle
keep Attention on the SQUARE output.. delete it, if you dont have it.