Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

wilba_mb_6582_parts_list [MIDIbox].pdf

use for the wiring from top to bottom pcb:

8x from mouser:

...

BOM note:

the most important things are:






PIC chippreprogrammed with bootlader

ask me if you want one preprogrammed PIC chip 



SID chips

2x needed - one minimum

8580 or 6581 or 6582

ebay or ask me

Frontpanel and rearpanelsee note for the ID:output in this list to improve the rear panel 

http://thebeast.co.uk/?product_cat=midibox

schaeffer


original power supply (latest square box version)
ebay

powerswitch from ebay- or use a DPDT switch on rearpanel


Powersupply DIN Jack


low current LED´s - which fit against the front panel holemake sure the color match with the displaytme, mouser

Display HD44780make sure the color match with the LEDs

ebay or

https://www.reichelt.de/?ARTICLE=197539&PROVID=2788&gclid=Cj0KCQjwnv71BRCOARIsAIkxW9EoN6P8R7GphI8wu7xhxPxjfkRsPToMK2CHZ0oIArMaQMHIwGbID6QaAtPiEALw_wcB


case Pactec PT10
mouser

FAN only when you install 6 or 8 SIDs

5Volt  40mm fan - ebay


9x flat ribbon cable to connect the pcbs together

571-FST-21A-8

FST-21A-8
TE Connectivity FFC / FPC Jumper Cables
TARIC:8544499500 ECCN:EAR99 COO:MX


DO NOT INSTALL ALL headers and IC sockets or output drivers

if you only want 2 SID chips - you have to install and buy less parts

you only need 2 SID chips and one preprogramed PIC chip.

more SIDs. can be played on a different MIDI channel - but there's no real Polyphonic playing on one midi channel. (correct me if I´m wrong)

everything inside the blue marking isn't needed when you only want a 2 SID chip version.

also the headers which are blue marked.


Image Added

ID:outputABSOLUTLY important 

the outputs are Stereo per jack !!

if you only install 2 SIDs - you can improve the jacks - 

install 2 MONO Jacks at the rear panel and connect each on the (Voice 1) stereo solder holes - other wise you need a adapter from stereo to 2x mono cables (insert cable)

todo: improve the rear panel to 2 or 4 MONO jacks (9.5mm holes)  move the holes more to top to get enough space between PCb and the jacks.

remove the unused holes from the panel files



Build Infos (mostly for myself)

...

I used the 2004A model: (HD44780)

Pinout


number_marked_on_Display














Display PIN12345678910111213141516
Display FunctionVSSVDDV0RSR/WEDB0DB1DB2DB3DB4DB5DB6DB7

BLA(+)

LED +

BLK(-)

LED -

on Mainboard:1112131415

16 

87654321910
check(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)(tick)


Mainboard:

12345678910111213141516
D7D6D5D4D3D2D1D0B+B-VSSVDDV0RSRWE



User Manual:

http://www.ucapps.de/midibox_sid_manual_fp.html

...