Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel:MOTM 300 VCOStatus:
Startdate: 28.11.2013Duedate: 01.02.2013 update 2019Manufacture link: http://www.synthtech.com/motm300.html |
2019 Build:
MU300
BOM, Guides
Parts ordered:
PCB, Panel, bracket, pots, from bridechamber
...
i recommend usage of IC Sockets (precision sockets each arround 0,30€)
keep Attention on the 0,1% resistors with low ppm (around 20ppm instead of 50ppm for normal metal film resistors)
...
1ea 100K 0.1% (marked 1003B) R45 mouser: 66-RC55LF-D-100K
652-4116R-1LF-10K DIP 10K resistor |
5x 100k linear pot (spectrol, vishay, bitech)
...
http://www.dragonflyalley.com/constructionMOTM300.htm#mods
I used in my builds 1,5Mohm for R50
and 270K for the mod above R13 ( cut the trace as shown in my picture and plave the 270K resistor in the vias.
Calibration described Calibration descibed in the Userguide:
Gallery | ||
---|---|---|
|