Page History

...

DD-EXP-BOM-REV1.0.1.pdf latest version for rev.1.0 and YOU MUST ADD 2x TL071 and 1x 4.7uF MLCC capacitor RM5
DD-EXP-BOM-REV1.0.0.xlsx (Old version) for rev.1.0

For all DDRM Expander : remove the 6N138 and buy 6N139 to avoid Midi issues (stucking notes)

BOM LATEST BOARD VERSION INFO

...

Deckard’s Dream Expander FAQ and Build Guide V1-7.docx

Trimmer Values (was requested by a user)

SIG= 501 = 500Ohm

REF: 201 = 200R

0.2Khz =103 = 10K

2.5k = 103 = 10K

Further Build Infos (was requested by a user)

Distance between Panel and Slider/control PCB = 10mm

Distance between Controlpcb and analog pcb = 12mm

MIDI-NOISE FIX pictures:

only for DIY PCB Version 1.0

...

If you want a fix of your factory assembled Version, contact me 

Click expand for Pictures from rev1.0 pcb Modification FIX

Power LED Installation:

remove the 12V LED from the Card PCB and drill a 4,5mm hole in the frontpanel - which is the standard size for 3mm LED-holders (available in most electronic shops)

...