...
cables for wiring around 3m in total (with gatebooster)
see gatebooster mod for
Build guide:
1.assemble all parts on the gatebooster, except the headers.
...
3. do the wiring job for the midi connector - mount it in the case - then solder the cables (or you run later in trouble when you try to build in the midi connector in the case - the connector must be built in from front.)
pin 3 and 5 of the midi jack is the signal what you have to connect with the 3 pol header (from left pin 1 and 2 ) on the gatebooster pcb, the third pin is for gate input from ttsh.
4. run a wire from CV1 to the TTSH mainboard pcb header EXT CV IN (no ground needed here)
...