Versions Compared

Old Version 7

changes.mady.by.user LED-man

Saved on

compared with

New Version 8

changes.mady.by.user LED-man

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
borderColor#000000
bgColor#f0f0f0
titleColor#FFFFFF
titleBGColor#4C5356
titleProject

Projecttitel:cgs75 Serge VCS in MOTM

Status:
Status
colourGreen
title

pcb

finished

Startdate: 28.02.2014

Duedate:

30

02.

12.

July 2014

Manufacture link: http://cgs.synth.net/

...

Adjustments on the VCS board are set to obtain a 0 to +5 volt level when the unit is cycling, producing a 100Hz triangle wave. An oscilloscope is required for this adjustment. In an oscilloscope is not available, adjust for the least distorted sounding waveshape.

 

 

from electro-music thread:

Image Added

 Image Removed

 

Image Removed

switch wiring like this:

Schematics:

keep attention on the Processori input jack with 200K resistor at the jack switch to +V.

also make sure you have all 3  "bridges" correctly filled with a piece of wire or rest from a resistor leg, otherwise the module dont work correct.Image Removed

 

 

Gallery