...
https://www.diysynth.de/pcbs-panels/arp1601-step1-fix-mod-pcb.html
assembled Version:
https://www.diysynth.de/pcbs-panels/arp1601-step1-fix-mod-pcb-97.html
BOM:
| amount |
|---|
3x IC socket
1x IC Pin to IC Pin adapter to solder one end at the PCB and to push one end in the IC socket of the 1601
2x CD4011
(1x CD4520 - from the original place)
1x 100K resistor
3x 100nF ceramic cap (X7R is fine) (decoupling cap)
| value | ||||
|---|---|---|---|---|
| 2 | CD4011 | DIP | ||
| 1 | 100k resistor | standard 1/4W | ||
| 3 | 100nF | X7R THT capacitor | ||
| 1 | MTA 3pole header | MTA100 size | TE-connectivity | or just jumper it with a resistor leg |
| 1 | 10-12mm spacer | Male-male or Female-male M3 | ||
| 1 | 16pins needed - double pin row for IC sockets | https://www.tme.eu/de/details/mct-1-36-1-g/prazisionssockel/adam-tech/ | ADAM TECH | MCT-2-36-1-G) |
| 2 | 14pin ic socket | THT | ||
| 1 | 16pin IC socket |
guide:
start with the bottom and the double contacts:
you can hold the double contact pin stripe by using an IC socket
Solder flat as shown:
Then install the remaining parts..
Thats how it fits in the 1601 clone :1x MTA100 3pole header or use a cable with a On/ON switch - use the GND pad for shielding
