Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: TheConeyCloney Project - VCS3 CloneStatus:
Startdate: 08/2018Duedate: 12/2018Manufacture link: facebook group |
Known Issues:
...
source: email from thecloney company
2. TRACE ERROR ON THE X-BOARD
This time on the X-board (at the circuit of OUTPUT AMPLIFIER 1).
See the picture attached - The problem is R38 (2k7) connecting to C18.
You will have to seperate the corner (knee) from the straight line.
Just cut the straight line besides the knee and link both parts by a simple (insulated) wire.
source: email from thecloney company
source: email from thecloney company
3. change on power supply wiring
Here comes an useful update for the primary PSU wiring. → the updated wiring guide is only visible on the child page - please register to get access on this restricted page ( i only confirm the access for "thecloney" customers)
The 1k resistor R12 has been removed to ensure the most possible electrical safeness all over the synth.
See the attached pages "Appendix B - PSU primary", mentioned to replace the old version in your manual.
source: email from thecloney company
4. Change with cable type
"As one of the Cloney builders reported, and maybe you also noticed meanwhile, there is an issue at the Elecronics-Kit.
Obviously i did not realize the shielded two core cable was not delivered as ordered.
At the receipt and at the pack slip the cable was named correctly, but in fact the cable lacks the shield.
I have not extra checked the appearance of the shield and trusted the documents. So i cut the cables from the spool and packed them to the kits.
Now i know, it was the wrong cable and i cant claim that anymore.
Please have a look at the two core (black) cable, if there is a shield or not. If not, you have to order at least about 4 - 5 meters of shielded double core cable.
If i would order and ship it, the shipping would be much more than the individual cable. So its not economic at all.
Thats why i beg you to order this by yourself.
I hope thats not too disappointing to any of you.
For the specs please see the attached PDF file.
Have a look at "2xAWG24"
source: email from thecloney company