Page History:
Date | Autor | what | |
---|---|---|---|
May 9. 2018 | LED-man | DDRM 2.0 guide initial | |
Table of Contents
Deckard's Dream Synthesizer
Hi all, this is the place to find the latest building documents for Black Corporation's Deckard's Dream polyphonic synthesizer.
Currently, this project is at rev 1.0, PCB's are currently being released to builders. (18.Oct. 2017) and are being constructed.
A new PCB version rev. 2.1 is planned and the release is planned for July 2018, this page is only for rev.2.x
Product Info:
the Deckard's Dream product is available as Build to order and DIY KIT Version, both released in 2017.
Its also known or coined as the "DDRM".
The difference in the DIY KIT and assembled (Build to order) are:
- the component format, the DIY KIT is mostly THT, the build to order synth is mostly in SMT.
- The case size is not as deep for the build to order as it is for the DIY.
Note: Although the DIY has most of the SMT devices pre-installed onto the PCBs, there are over 675 SMT decoupling capacitors (0805) and one small (SOIC8) power switch device that MUST be installed by the builder, in addition to the through hole components
A addional 1U expander is planned - release in 2018
Examples of Presets and voices: https://soundcloud.com/deckardsdream
Technical Specs:
Current identified Errors/Omissions/Errata:
Date | Location | Identified issue | Resolution |
---|---|---|---|
Bugtracker
further bugs, issues, problems are reported here (here are user reported issues due to soldering failures or other issues reported too)
https://github.com/ffont/ddrm-issues/issues
Deckard's Dream Home and Store: http://www.deckardsdream.com
Current BOM
file here
Shared Mouser Basket: link here
Ultravox reply: "The cart doesn't include items that the BOM says are sourced from eBay, Small Bear, synthcube, etc."
About partsourcing: check the price for the next price break ( 3 resistors are more expensive than 10)
for EU users: order from www.TME.eu standard parts, its cheaper as mouser
REVxxx update here
(please note the version and changes at the bottom of the sheets. Also see Errors/Omission and Errata above)
Official Build Guide: http://www.deckardsdream.com/build ??? for rev2 ??
Firmware:
@ Needspeed please delete files if needed
check the download location: http://www.deckardsdream.com/downloads/ for updates, i prefer to wait few weeks before you install a newer version, or check the closed facebook group for comments.
Description: DECKARD'S DREAM BOOTLOADER REV1.0
http://www.deckardsdream.com/downloads/DD-BOOTLOADER-REV2.0.hex
Description: Firmware
Firmware installation procedure: Software Loading Procedure R0.9.3.docx
http://www.deckardsdream.com/downloads/DD-1.2.3.zip (updated factory presets file and an extra presets bank by Michael Rosner (comes as a BANK2))
http://www.deckardsdream.com/downloads/DD-FIRMWARE-REV1.2.1.bin (preferred)
tested/stable Firmware: (don´t install the latest firmware on important productive environment, thats why i prefer the following)
- build by DSL-man: 1.2.1 firmware with 2 soundbanks from 1.2.3 release : DD1.2.1_with_2banks.zip
If you have a working DDRM and only want to update the firmware or soundbanks, just connect a USB cable to your PC and drop the unziped file on the "storage device disk", the zip file contains a firmware file and 2 soundbanks (Bank2 are CS80 patches)
MIDI Chart (MIDI Control Change Message Mapping for the DDRM) http://www.deckardsdream.com/downloads/DD-MIDI-CHART-REV1.0.pdf
Knowledge and other links
Build: Deckards Dream General Build Thread
Discussion: DIY CS-80 imminent...(Deckard's Dream)
https://www.facebook.com/groups/deckardsdream/
Parts Resources:
Synthcube complete parts kits: http://synthcube.com/cart/ddrm-deckard-s-dream-kit
Thonk Group Buys for CEM3340: https://www.thonk.co.uk/shop/curtis-cem3340-ic-vco-chip/
Metal Case: DIY Hub http://siddarthianinnovations.bigcartel.com/product/deckards-dream-pre-order-front-panel-and-rack-case
Wooden Case: Ross Lammond (UK) http://www.lamonddesign.co.uk/index/
a very helpful Tool for the SMD Soldering: (and sponsoring for this website hosting)
(link here )