its only for the rev.6b (its printed on the PCB - left hand to the DC-DC converter)
Download:
1601_rev6b_v1.0.xlsx (checked against one build by me)
you need 2x 100k lin PTL45 slider and 1x 100K log PTL45 slider !!!
if mouser is out of stock:
PTL60-15O0-104B2 without center detent
or with red led:
internal note:
17x G-628S-0001 gateswitch and SW22
1x GF-642-6010 4PDT switch. (SW4)
2x 629-GF-326-0001 SW2 and SW21
for Patricks Custom case: add 2x 30mm M3 Spacer (female-female)
you also need screws for the side panels: 10x M3 10mm
Don't miss to order the Clock Divider Parts