Page History

further links: http://www.dragonflyalley.com/jHTripleChorusConstruction.htm

...

List:

jh_triple_chorus_bom.pdf

Reichelt shoppingbasket

http://www.reichelt.de/?ACTION=20;AWKID=41401;PROVID=2084

Building Tip from Juergen.H

...

Background from J.Haible website

 The lush Sound of the Solina (TM) Ensemble is created by 3 BBD delay lines that are modulated in a unique way:
There are two 3-phase modulation generators, one running at slow speed ("Chorus"), and one running at high speed ("Vibrato").

...

Filtering in general, and the Crumar Performer in particular 
In the Solina, the signal as it comes from the tone generation and string sound shaping, runs thru a second order 12kHz filter before it goes into the BBDs. This acts as an anti-aliasing filter, as well as adding to the sound shaping a bit.
With longer BBD lines (TDA1022 instead of TCA350), the clock frequency can be higher, this allowing for a wider bandwidth without increased aliasing.
So I've implemented a 16kHz anti-aliasing filter, plus a 12kHz filter, to be able to choose a broadband sound vs. a slightly darker sound.
A third option was inspired by the Crumar Performer: It has a very specialized 3-Band EQ that is very effective on string sounds. With my Performer, I get very convincing, yet very different, string sounds with a 0-10-0 setting and with a 10-0-10 setting (low-mid-high).
I've included this wonderful EQ in my emulation.

First Step- sockets.. for 3 triple Chorus.

Build tips:

calibration:

U6: Pin 1 6hz

U6 PIN 7 0,6HZ  (YOU NEED A DSO to measure this slow value with 1s/ and 100mV, typically analog scopes only offer 200mS)

use CD4011UBE or try different vendors