Versions Compared
compared with
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: VDD 4002 Digital ReverbStatus:
Startdate: 01.01.2018Manufacture link: |
...
just this website |
The VDD 4002 is a Digital Reverb for DIY
Image Removed
Specification:
Eurorack and 5U/FRAC Format compatible
works on -12/12V - -15V/15V
adjustable HF Filter
good Opamps NE5532
powerfiltering
its exclusive available at DIYsynth.de
INFO:
thats an easy to build module,
ask diysynth.de if you have problems to find parts, the most parts are in his shop and not all parts are listed there.
BOM:
ID | PCB ID | Name | Quantity | TYPE | Source | |
1 | IC socket | IC socket 8pin | 2 | 1pin | https://www.diysynth.de/diy-components/passive-components/ic-sockets/8-pin-dip-ic-sockel-round.html | |
2 | C1,C2 | Electrolyte capacitor Radial_D5.0mm_P2.00mm | 2 | 10µF | https://www.diysynth.de/?cat=c12_Capacitors-capacitors.html | |
3 | C3,C4 | Electrolyte capacitor Radial_D5.0mm_P2.00mm | 2 | 1µF | https://www.diysynth.de/?cat=c12_Capacitors-capacitors.html | |
4 | C5 | Capacitor WIMA RM2.5mm L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02 | 1 | 22nF | https://www.diysynth.de/?cat=c12_Capacitors-capacitors.html | its listed as RM5 there, note it in the order and you get the correct part. |
5 | C6,C7,C8,C9,C10,C11 | Filmcapacitor (Polyester) RM2.5mm | 6 | 100nF | https://www.diysynth.de/?cat=c12_Capacitors-capacitors.html | its listed as RM5 there, note it in the order and you get the correct part. |
6 | D1,D2 | Rectifier /diode 1N4001 THT | 2 | 1N4001 | ask diysynth.de | |
7 | THRU | Cliff1384 jack | 1 | THRU | diysynth.de | |
8 | IN | Cliff1384 jack | 1 | IN | diysynth.de | |
9 | J3 | MTA-100-3p header +jack | 1 | THRU | only for non onboard jacks (MOTM) | or use a wire directly on pcb |
10 | J4 | MTA-100-3p header +jack | 1 | IN | only for non onboard jacks (MOTM) | or use a wire directly on pcb |
11 | J5 | MTA-100-3p header +jack | 1 | IN LVL 100KA | or use a wire directly on pcb | |
12 | J6 | MTA-100-3p header +jack | 1 | HP FREQ 100KB | or use a wire directly on pcb | |
13 | J7 | BTDR-2 reverb | 1 | BTDR | banzai - different models: short/medium/long | |
14 | J8 | MTA-100-3p header +jack | 1 | OUT 100KA | or use a wire directly on pcb | |
15 | J9 | MTA-100-3p header +jack | 1 | OUT jack | only for non onboard jacks (MOTM) | or use a wire directly on pcb |
16 | OUT | Cliff1384 jack | 1 | OUT jack | https://www.diysynth.de/diy-components/passive-komponenten/buchsen/cliff-jack-3-5mm-mono-with-nut.html | |
17 | L1,L2 | BEAD-2B (Ferrite Bead) | 2 | 50R 10mhz | https://www.diysynth.de/diy-components/passive-komponenten/Ferrite-Beads/Dual-Ferrite-Bead.html | |
18 | P1 | MTA156 | 1 | MOTM | optional for 5U /MOTM |
...
Schematics:
Image Added
Image Added
BOM:
Schematics:
...