Cookie Information, please respect my cookie handling while usage this website, or close this session. click here
Page tree
Skip to end of metadata
Go to start of metadata
Project

Projecttitel: VDD 4002 Digital Reverb

Status: DONE

Startdate: 01.01.2018

Manufacture link: just this website


The VDD 4002 is a Digital Reverb for DIY


Specification:

Eurorack and 5U/FRAC Format compatible

works on -12/12V -  -15V/15V

adjustable HF Filter 

good Opamps NE5532

powerfiltering


its exclusive available at DIYsynth.de


INFO:

thats an easy to build module,

ask diysynth.de if you have problems to find parts, the most parts are in his shop and not all parts are listed there.


BOM:


IDPCB IDNameQuantityTYPESource
1IC socketIC socket 8pin21pinhttps://www.diysynth.de/diy-components/passive-components/ic-sockets/8-pin-dip-ic-sockel-round.html
2C1,C2Electrolyte capacitor Radial_D5.0mm_P2.00mm210µFhttps://www.diysynth.de/?cat=c12_Capacitors-capacitors.html
3C3,C4Electrolyte capacitor Radial_D5.0mm_P2.00mm21µFhttps://www.diysynth.de/?cat=c12_Capacitors-capacitors.html
4C5

Capacitor WIMA RM2.5mm

L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02

122nFhttps://www.diysynth.de/?cat=c12_Capacitors-capacitors.htmlits listed as RM5 there, note it in the order and you get the correct part.
5C6,C7,C8,C9,C10,C11Filmcapacitor (Polyester) RM2.5mm6100nFhttps://www.diysynth.de/?cat=c12_Capacitors-capacitors.htmlits listed as RM5 there, note it in the order and you get the correct part.
6D1,D2Rectifier /diode 1N4001 THT21N4001 ask diysynth.de
7THRUCliff1384 jack1THRU diysynth.de
8INCliff1384 jack1IN diysynth.de
9J3MTA-100-3p header +jack1THRU only for non onboard jacks (MOTM)or use a wire directly on pcb
10J4MTA-100-3p header +jack1IN only for non onboard jacks (MOTM)or use a wire directly on pcb
11J5MTA-100-3p header +jack1IN LVL 100KAor use a wire directly on pcb
12J6MTA-100-3p header +jack1HP FREQ 100KBor use a wire directly on pcb
13J7BTDR-2 reverb1BTDR banzai - different models: short/medium/long
14J8MTA-100-3p header +jack1OUT 100KA
or use a wire directly on pcb
15J9MTA-100-3p header +jack1OUT jack only for non onboard jacks (MOTM)or use a wire directly on pcb
16OUTCliff1384 jack1OUT jackhttps://www.diysynth.de/diy-components/passive-komponenten/buchsen/cliff-jack-3-5mm-mono-with-nut.html
17L1,L2BEAD-2B (Ferrite Bead)250R 10mhzhttps://www.diysynth.de/diy-components/passive-komponenten/Ferrite-Beads/Dual-Ferrite-Bead.html
18P1MTA1561MOTM optional for 5U /MOTM diysynth.de
19P2Pin_Header_Straight_2x08_Pitch2.54mm1EURO POWER optional for Eurorack Powerask diysynth.de
20R1,R6,R171K 1% resistor31K https://www.diysynth.de/?cat=c11_Resistors-Resistors.html
21R2,R5,R7,R8,R16100k 1% resistor5100K https://www.diysynth.de/?cat=c11_Resistors-Resistors.html
22R3,R48R2 1% resistor28R2https://www.diysynth.de/?cat=c11_Resistors-Resistors.html
23R9100R 1% resistor1100Rhttps://www.diysynth.de/?cat=c11_Resistors-Resistors.html
 

24R10,R114K 1% resistor24K7 https://www.diysynth.de/?cat=c11_Resistors-Resistors.html
25R12,R1350k 1% resistor (49k9)250K https://www.diysynth.de/?cat=c11_Resistors-Resistors.html 49K9 is ok too
26R14,R1510K 1% resistor210K https://www.diysynth.de/?cat=c11_Resistors-Resistors.html
27U1,U2NE5532 OPAMP DIP-82NE5532 https://www.diysynth.de/diy-components/aktive-bauteile/ne5532.html
28U378L05 TO-92_Inline_Wide1LM78L05 in most shops available likle mouser or tme.euhttps://www.mouser.de/productdetail/on-semiconductor-fairchild/lm78l05acz?qs=sGAEpiMZZMtdAabcSkQOl9gipZmsKLz7
29offboard100KA (log) Potentiometer 16mm2alpha 16mmhttps://www.diysynth.de/diy-components/passive-komponenten/Potentiometer/Potentiometer-16mm-100K-Log-solderlug.html
30offboard100KB (lin) Potentiometer 16mm1alpha 16mmin most shops available likle mouser or tme.eu


Schematics:

4002-01.pdf


  • No labels