Panel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: Midi-CV InterfaceStatus: STATUS finishedStartdate: 2012Duedate: 2012updated Aril 2014 Manufacture link: http://www.sequencer.de/synthesizer/viewtopic.php?f=13&t=63127Sourcen: http://www.sequencer.de/synth/index.php/MCV876_Controller_Update |
Subpages
Children Display | ||
---|---|---|
|
sequencer.de Forum Midi CV Interface designed by nordcore.
http://www.sequencer.de/synthesizer/viewtopic.php?f=13&t=63127
Builders guide:
Sourcen: Midi-CV-007a.zip
Schematics: Mod-CV-1.0.sch.pdf
Jumper:
http://www.sequencer.de/synth/index.php/MCV876_Controller_Update
build from pcb..inkl. pic chip
Hardware
4 Spannungsausgänge (CV) von 0-10V
6 Gate Ausgänge 0 auf 5V schaltend.
1 LED „Universalanzeige“
1 Taster.
Midi-Eingang
Midi-Thru Ausgang
/synthesizer/vie ... 25#p713784
http://www.sequencer.de/synthesizer/dow ... hp?id=5094
RED = as Default Jumper.
if jumpered JP2, 3, 4 are the +5V, Gate or CV optional on the Doepfer-Bus
choose "Rg" (Range) Jumper , by using 5V (open), +/5V (2-3) or 10V(1-2) for using CV
Hardware
4 Controlvoltages (CV) 0-10V
4-6 Gate Outputs 0 to 5V switched.
1 LED „multicontrol“
1 bushbutton.
MIDI-Input
MIDI-Thru Out
(No MIDI out(Es gibt keinen Midi-Ausgang, das Interface kann also nicht ausgelesen werden. )
Funktionsübersicht – Standardbelegung
Das Interface kann zwar (über Midi und Sys-Ex Befehle) durchaus unterschiedlich konfiguriert werden. Zunächst aber die Standardbelegung. Die ist einkanalig und monophon.
Defaultsetting is monophon with one channel
CV 1 | Tonhöhe (Noten) | Gate 1 | Note-ON |
CV 2 | Velocity | Gate 2 | CC 18 |
CV 3 | Mod Wheel | Gate 3 | CC 19 |
CV 4 | Pitch Bend | Gate 4 | CC 20 |
Gate 5 | Midi Start/Stop | ||
Gate 6 | Midi Clock /6 (entsprechend 16-tel) |
CV 1 and Gate 1 are Standardoutputs
all CV works for und Gate 1 sind die Standardausgänge für den Tonhöhen- und Gate-Eingang des Synths. Die CV ist für 1V/Oktave ausgelegt. CV2 ist die Anschlagstärke und geht von .
CV2 Aftertouch 0-5V.
CV3 Pitchbend, middleposition 5V , works with CV3 ist der Pitchbender, in Mittelstellung liegen hier 5V an, es geht von 0...10V. CV4 ist das Modulationsrad, von 0 (Ruhestellung) bis 5V.
CV4 Modulationwheel
all CV´s can be changed in software/ctrlr to use for other modes like polyphonic mode,
setup controlled by ctrlr panel as standalone or VST Plugin. ->
Builders guide:
BOM: reichelt.de
...