...
2u_motmformat_dual_digital_oscillator_mdota_137.fpd -> the right frequency pot/coars is a pushpull pot - to enable the link between OscA/OscB
Building Tips:
The *100n caps are the output filtering caps. I found that 100n is a bit too mellow for my taste and went with 10n instead. That is what you hear in the latest demos. In the BOM they are marked as 10n*.
copy from muffs:
Here's a mod idea: use a switching jack for the Wave CV in and connect the switch to 5v. That way the Wave pot will sweep through the table manually when no cable is inserted into the jack.
If you do this, please use a current limiting resistor to protect anything you plug in here. 100 -200 Ohm should be enough.
for MOTM Format:
by usage of 15Volts change the both trimmer from 10K to 25K
...