...
1.assemble all parts on the gatebooster, except the headers.
2.solder like as shown in my pictures some headers for midiimplant on the gatebooster pcb, i prefer a adapter with male/female headers to remove the midi pcb from gatebooster (for repairs or testing)
...
pin 3 and 5 of the midi jack is the signal what you have to connect with the 3 pol header (from left pin 1 and 2 ) on the gatebooster pcb, the third pin is for gate input from TTSH.
4. run a wire from CV1 to the TTSH mainboard pcb header EXT CV IN (no ground needed here)the CV out from the midiplant must be connected to the KBD CV out jack - switch pin:
| Info |
|---|
the KBD Out jack switch pin must be isolated from the pcb trace,: (TTSH REV 2-3-4) 2 options are possible:
|
5. run connect 3 cables to the GATE/S-H section (AR/ADSR)
...