...
i dont support Main Power handling (ich supporte keine 110V/230V Basteleien)
in case of usage a of 110V/230V powersupply powersupplys dont add the parts for the onboard regulator (TTSH rev.1+2)
...
use rubber feeds otherwise the case "swings with the transformer frequency", you can hear it in the big ttsh case like a speaker.
tip: by usage of a internal 110V/230V psu - mount the psu in left corner and reverb tank on right/top corner with in/outputs to top - or you get a massive hum in reverb.
mount the psu on plastic/rubbers - because the empty case amplified the psu noise/hum/vibration.
| Info | ||
|---|---|---|
| ||
(if you have added the both switched regulators, desolder the 220nF caps, 100uH caps) |
...