Page History:
Deckard's Dream Home and Store: http://www.deckardsdream.com
Current BOM (last version valid 2.1.4 - Sep.2019)
DD-BOM-REV2.1.4.pdf DD-BOM-REV2.1.4.xlsx
Shared Mouser Basket: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=15f70d6513(made by me - 09/2019 from 2.1.4 BOM, not checked by me - but the amount of parts looks ok)
Ultravox reply: "The cart doesn't include items that the BOM says are sourced from eBay, Small Bear, synthcube, etc."About partsourcing: check the price for the next price break ( 3 resistors are more expensive than 10)for EU users: order from www.TME.eu standard parts, its cheaper as mouser
Prices incl. 19% VAT(Germany) and shipping (combined)Mouser 630€
OLED 10€
bracket 15€
spacers 25€
screws 10€
psu ext. 20€
v2164 x35 120€
CEM3340 x16 250€ or AS3340 120€
poti 100K 1x 2€
slidercaps set 12€
pushbuttons x5 5€
noise PIC x1 10€t. TOTAL : 1.111€
plus DIY PCB SET 999USD netto (no VAT/TAX calculated)plus Case 270USD netto (no VAT/TAX calculated)
(please note the version and changes at the bottom of the sheets. Also see Errors/Omission and Errata above)
http://www.deckardsdream.com/build use my tips:DDRM v2 build tips
Knowledge and other links
Build: Deckards Dream General Build ThreadDiscussion: DIY CS-80 imminent...(Deckard's Dream)https://www.facebook.com/groups/deckardsdream/
a very helpful Tool for the SMD Soldering: (and sponsoring for this website hosting)(link here )
Date | Autor | what | |
---|---|---|---|
May 9. 2018 | LED-man | DDRM 2.0 guide initial | |
Oct 25. 2018 | LED-man | BOM added | |
July 30 2019 | LED-man | software | |
Feb 2020 | LED-man | BOM pricing | |
June 2020 | LED-man | structure |
Table of Contents
Table of Contents | ||
---|---|---|
|
Tip | ||
---|---|---|
| ||
Hi all, this is the place to find the latest building documents for Black Corporation's Deckard's Dream polyphonic synthesizer.Currently, this project is at rev 1.0, PCB's are currently being released to builders. (18.Oct. 2017) and are being constructed.A new PCB version rev. 2.1 is planned and the release is planned for July 2018, this page is only for rev.2.x |
Info |
---|
Product Info:the Deckard's Dream product is available as Build to order and DIY KIT Version, both released in 2017.Its also known or coined as the "DDRM".The difference in the DIY KIT and assembled (Build to order) are:
|
Technical Specs:
Expand |
---|
Synthesizer features
Layer architecture
Master controls
Controls
Display
Connectors
Physical specifications * the DIY VERSION is different for the depth and weight
|
Current identified Errors/Omissions/Errata:
Date | Location | Identified issue | Resolution |
---|---|---|---|
Assembly Voicecard Guide: (credits to Trey Petty)
User Manual
Bugtracker
further bugs, issues, problems are reported here (here are user reported issues due to soldering failures or other issues reported too)https://github.com/ffont/ddrm-issues/issuesDeckard's Dream Home and Store: http://www.deckardsdream.com
Current BOM (last version valid 2.1.4 - Sep.2019)
DD-BOM-REV2.1.4.pdf DD-BOM-REV2.1.4.xlsxShared Mouser Basket: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=15f70d6513(made by me - 09/2019 from 2.1.4 BOM, not checked by me - but the amount of parts looks ok)
Ultravox reply: "The cart doesn't include items that the BOM says are sourced from eBay, Small Bear, synthcube, etc."About partsourcing: check the price for the next price break ( 3 resistors are more expensive than 10)for EU users: order from www.TME.eu standard parts, its cheaper as mouser
Prices incl. 19% VAT(Germany) and shipping (combined)Mouser 630€
OLED 10€
bracket 15€
spacers 25€
screws 10€
psu ext. 20€
v2164 x35 120€
CEM3340 x16 250€ or AS3340 120€
poti 100K 1x 2€
slidercaps set 12€
pushbuttons x5 5€
noise PIC x1 10€t. TOTAL : 1.111€
plus DIY PCB SET 999USD netto (no VAT/TAX calculated)plus Case 270USD netto (no VAT/TAX calculated)
OLED Display:
make sure your OLED folow this pinout VCC-GND-SCL-SDA, very often shows the shop the correct pinout but deliver another type.AND short the pins on the display side (where the Frontpanel is) to prevent shorts to the Frontpanel.if you cant source the correct display (pin) use restore legs and bend they - use cable shrink tube to protect this for shorts(please note the version and changes at the bottom of the sheets. Also see Errors/Omission and Errata above)
Powersuply Warning
don't mix the external PSU bricks or you destroy your Device.
The Kijimi use a 24V DC PSU
DDRM v1 DIY use a 12V DC
PSU DDRM v2 DIY use a 12V DC
Official Build Guide:
Firmware:
moved to separate page: User Manual and FirmwareKnowledge and other links
Build: Deckards Dream General Build ThreadDiscussion: DIY CS-80 imminent...(Deckard's Dream)https://www.facebook.com/groups/deckardsdream/Parts Resources:
Synthcube complete parts kits: http://synthcube.com/cart/ddrm-deckard-s-dream-kitThonk Group Buys for CEM3340: https://www.thonk.co.uk/shop/curtis-cem3340-ic-vco-chip/Metal Case: DIY Hub http://siddarthianinnovations.bigcartel.com/product/deckard-s-dream-front-panel-and-rack-case-rev-2Wooden Case: Ross Lammond (UK) http://www.lamonddesign.co.uk/index/a very helpful Tool for the SMD Soldering: (and sponsoring for this website hosting)(link here )
Wooden Case: contact me if you want it
Recent space activity
Recently Updated | ||||||||
---|---|---|---|---|---|---|---|---|
|
Space contributors
Contributors | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|