...
| Table of Contents | ||
|---|---|---|
|
That’s not an official guide.
It’s more an best practice guide, you find infos about the firmware/software on the main page: KIJIMI Documentation
...
- Sourcing parts, order higher quantities to get the best price and more parts for free or for a better condition than ordering later single parts and you have spares (tactile switch, encoder, potentiometer, opamps 3340,3360)
- Sort all parts, one carton with resistors, one for capacitors...one for mechanical parts, one for Ics/semis.
- Sort the values like 1R-999R, 1K-9.9K, 10K-99K.... same for capacitors
- Start with the mainboard and hardwareboard and next Breakoutboard and PSU.. so you left less plastic bags for the voices which makes things easier
- Use lead based solder core or you get trouble with the ground pads and in case of failure or wrong part placements it’s more complicated to desolder the part.
- Use for the voice cards a mounting frame which costs 50-250€.
- More later - please read carefully the page: KIJIMI Documentation this includes instructions about the firmware and known issues/tips
BOM:
new BOM from July 2019 with improved Sound, i renamed the File because Roman used the same Filename as before which can confuse and ends in mistakes when you open accidentally an older file with same name.
...
| Expand |
|---|
600€ plus VAT Mouser (€ incl.19% german VAT) AS3360 100€ AS3340 80€ ssi2144 ICs (VCF) 55€ OLED 5€ Potentiometer - 35€ Knobs 25€ Noise IC 10€ IC Sockets 20€ XMOS Programmer 22€ metalparts 20€ EDGE card holder 10€ pcb/panel plus VAT 1200€ case: ca.250€ ____ TOTAL around: 2530€ |
Don´t miss the frontpanel Frontpanel and case from DIYHUB http://siddarthianinnovations.bigcartel.com/
...