Page History

...

Panel

borderWidth	2
title	Tools

You need experience in soldering SMT Parts (around 350 SMT capacitors and 32 ICs in SOIC format).
required Tools are: Soldering Station, Flux pen, magnifying Glasses, Oscilloscope, some pliers, tweezers, PC or Mac for installation of the boot loader and firmware
It is recommended to have a bench- power supply with current limiter for the first test.
Programming is done via an ST-link programmer which is listed in the BOM (former DDRM builders can use the existing programmer) - normally its a Windows App. but with some experience in MacOS possible too

...

BOM:

ISE-NIN-BOM-REV1.0.1.xlsx updated by BC on 24th.Sep.2022

ISE-NIN-BOM-REV1.0.1.pdf. updated by BC on 24th.Sep.2022

the Mouser project can't be shared anymore, its the best that everyone create a own to their requirements.

too much parts are out of stock and its highly recommend to order by other shops too.

Tme.eu is a good place for European users. (EU)

other sources are digikey, RS, farnell, reichelt, Conrad, Uk-electronik, banzai (call the guys about the stock), thonk.

here´s an excel with some parts which I ordered by tme (it doesn't include all- but some parts are here much cheaper and in stock)

some notes:

the tactiles are out of stock by mouser - use tme.eu or other supplier.

for the 3900pf caps, you can use polypropylene caps - do not use polyestercaps

use eBay or tme for the SMT caps to safe money

...

The ssi2131,as2164,as3109 are available as a bundle by

...