...
the heart of the ISE-NIN must be build really carefully !!
you need a an ESD map and ESD safe handling (tools) - because the uController is preinstalled and can be destroyed by due to wrong handlinghandeling
do not install the 10pin headers/pins yet (we put the header on the pcb later - when we have finished the controlboard - to get the best alignment)
...
respect the OLED PINOUT as described in the above listtable
don't forget to solder bridges at the white flat line on the EDGE cards are bridge as shown in the above listtable.
wash/clean the pcbs carefully
...