...
the part number for the trimmer at mouser isn't correct (more information is in the "Issue" list)
Information on the content of the DIY-Kit
The case and panel are included with the kit.
...
(Motherboards have all DACS, CPU, audio CODEC, and headphone amp already mounted on them).Note for builders
Before you built the ISE-NIN kit:
- You need experience in soldering SMT Parts (around 350 SMT capacitors and 32 ICs in SOIC format).
- required Tools are: Soldering Station, Flux pen, magnifying Glasses, Oscilloscope, some pliers, tweezers, PC or Mac for installation of the boot loader and firmware
- It is recommended to have a bench- power supply with current limiter for the first test.
- Programming is done via an ST-link programmer which is listed in the BOM (former DDRM builders can use the existing programmer)
...
Currently identified Errors / Omissions / Errata:
Date | Location | Type | Identified issue | Resolution | related for development | affected PCB version | fixed Version |
---|---|---|---|---|---|---|---|
30 Aug. 2022 | BOM - Voices | ERROR | Mouser part number for the trimmer is invalid | Line 180: 652-3296X-1-103RLF | BOM update needed | -- | |
30. Aug 2022 | BOM - Mainboard | INFO | the 220uF caps on the Mainboard are BI-POLAR - | respect the BOM partnumber | |||
07 Sep. 2022 | Hardware Board | BUG | there's no Pinout described on the Hardware Board for the OLED - | please read the following INFO section carefully | can be improved with an silkscreen info | 1.0 | |
13 Sep. 2022 | BOM: Voices | INFO | the Mouser BOM shows 32x 240pF C0G capacitors for the Voices - used in the OTA Filter. These are 10% tolerance. | you can change the capacitors to Polypropylene, Silver MICA, Styrene - with 1-2.5% or match good capacitors in this range with an LCR meter (check the data sheets of the meter) | - | - | - |
13.Sep | create a Silkscreen for MTA156 Powerheader pinout | 1.0 | |||||
15.sep | bom MB | flash 2x delivered | check bom - patrick |
...