...
Mainboard (MB) - do not install the headers/pins - check the soldering on the EDGE card pins !!
Controlboard (CB) - do not install the headers/pins, no LEDs yet !!, no sliders , no potentiometer
wash the pcbs !
assemble the voices until the other pcbs are dry - do not install the trimmer until you have washed the pcbs
install the sliders on CB, the potentiometer must be installed with the front panel for best alignment Test the PSU without BB - on a bench psi with current limiter 200mA
install the spacers (12mm spacer between CB and MaBMB) put the MB on the CB - then solder the headers on the pcbs the pcbs
mount the bracket on the BB pcbs with 2 screws.
testing
Test the PSU without BB - on a bench psu with current limiter 200mA
Firmware Installation
The latest Firmware is on a separate page : ISE-NIN Manuals and Firmware
...