...
Voice Card Assembly Document. This was created by Lysandre Follet, and has been tested as correct by a couple builders.
Warning |
---|
some users reported that the board doesn´t fit in the case - the mainboard pcb is too big.. on the mainboard is on top and bottom a small 3-4mm pcb stripe, that need´s to be removed. |
Tip |
---|
when you have trouble with your voicecards like a whistle on upper or lower card or wrong VCF... the calibration process is not perfect, swap this "faulty" voicecard with another card and run the calibration for the single voicem not for all. if everything wents wrong: insert only one voicecard in Slot1, run calibration (not the tune function). when everything is fine, add the second card to slot 2 and run again calibration - on slot 2, insert card 3 and so on.. |
...