Kijimi-manual-Draft-Version.pdf (early draft)
Black Corporation Firmware Updater.app.zip (only for updater not for first install) - do not work on Catalina
Kijimi Factory Presets MJ (1.2).syx (presets - transfer it with sysexlib. per KIjimis USB-Midi-interface)
Kijimi1.1.0.bin(only for updater not for first install)
kijimi_1.2_package_build_by_DSL-man.zip (includes latest Firmware and presets, Updatetool) NEW
make sure you perform the calibration of the knobs again as described (Potentiometer Calibration : Important: turn all pots to the right side (max) then only turn the center detent knobs to middle position for the center detent calibration. for the second step turn all knobs to right (max) position
Firmware 1.2: release Notes
click to expand:
Change log: 1.2 1. 16+ LFOs! To activate, (SETTINGS->LFO->MOD MODE->INDIVIDUAL) To operate, select destination mode (Positive, Negative, Bipolar). Long press (Press and hold for approximately 1.5 seconds) the destination selector until flashing. The LFO parameters to the flashing destination may be adjusted with information presented in the display. Multiple destinations in one row may be selected in order to affect all of those destinations with shared values. If multiple destinations in different rows are selected, parameters for destinations in the first row may be adjusted with the LFO1 controls and parameters for destinations in the second row may be adjusted with the LFO2 controls. In this case, both LFO1 and LFO2 settings will appear on the display. Once LFO adjust mode is activated (flashing), other LFOs may be selected by selecting them with a regular non-long press. Additional LFOs may be grouped with an existing group by long pressing the new destination while the first group is flashing. A quick press of a flashing destination will deactivate LFO adjust mode and return to destination toggle mode. 2. Arpeggiator 2.1 Styles: 2.2 Rate 2.3 Randomizer 2.4 Velocity + a new bank by Richard Devine! |
The Bootloader is in the DIY Build Guide Page: