Projecttitel: DINSYNC RE-303Status:Startdate: 2016Duedate: 09/2018Manufacture link: http://privat.bahnhof.se/wb447909/dinsync/re-303/Forum : http://23.235.199.139/~re303c5/forum/ |
The Founder Paul Barker developed in 2016 the RE-303.
the "internal Name" is Space Cadet.
few different case types are avaiable/fits with the pcbs: TT-303 (old version),
you find a german article from me, about the RE-303 here:
https://www.amazona.de/test-din-sync-re-303-die-beste-tb-303-ever/
RE-303 v1.2 main-board and switch-board PCB.
Sumida coil and adapter.
3pc set of power transistors.
8pc set of potentiometers (tune, cutoff, resonance, env, decay, accent, tempo and volume with switch)
2pc set of rotary switches (pattern/mode)
3pc set of 6.3mm jacks (mix in, headphone, main out)
2pc set of 3.5mm jacks (cv/gate)
1pc DC jack
1pc waveform switch
Parts what you have to source:
the following files are based on the same version but with different office formats:
MOUSER BOM project card: https://www.mouser.at/ProjectManager/ProjectDetail.aspx?AccessID=0324e99177
ift(y): yellow coil for the original cpu clock |
Shop:
https://shop.re-303.com/product/pixie-powered-re-cpu/
Firmware and more:
https://github.com/sunflowr/recpu
Julian from Sonic Potions developed a CPU for the RE303, this CPU is also an replacement for TB-303
(more here: https://www.sonic-potions.com )
User guide: SonicPotions_Re-303_User_Guide.pdf
Installation guide:SonicPotions_Re-303_Installation_Guide.pdf
Forum about the CPU: http://23.235.199.139/~re303c5/forum/forum/7-re-303-cpu/
different cases are on the market:
Alu case in black, silver, white, gold..
http://23.235.199.139/~re303c5/forum/topic/396-re-303-aluminum-case-silver-andor-black-anodized/
RE-303_case_assembly_guide.pdf
you can also use a Bassbot TT-303 case (the first 303 style case)
(source: https://shop.re-303.com/build-it/)
RE-303_case_assembly_guide.pdf
no wobbling potentiometers anymore !!!
ask me if you need/want this solution, i left some pcbs..
you also need for the Midi Jacks an adapter.
update 01/2020: ground the MIDI IN port too, that's needed because the acrylic's adapter to the stereo 3.5mm jacks are isolated
in case you use silver knobs: they are metalized and make grounding issues, you have to remove from the bottom the paint with a cutter knife.(easy)
the blue cable connects ground from MIDI out to the MIDI IN jack.