Projecttitel: Syncussion SY-1 cloneStatus:Startdate: 09/2016Duedate: 11/2016Updated 26 July 2017 Manufacture link: http://thehumancomparator.net/ |
i built the syncussion in 2016 and got an assembled SY-1 too.
This Version is from Jon / Thehumcomparator.net from 2016 !
if you have trouble with hum/hiss/noise: its absolutely important to have a transformer based wandwart instead of a bumped switched powersupply. |
BOM:
inductor/choke:
PCB Overlay
copy from thehumancomparator.net: Errors on board. Unfortunately we have a few mishaps on the PCB, nothing major, but it’s nice to be aware of when building.
own notice: |
Mode Description:
A VCO 1 only
B VCO 1 modulates VCO 2 frequency, the latter is routed to the VCF
C Both VCO to the filter but VCO1 at reduced level.
D EG 1 modulates VCO1, EG2 modulates VCO2. Both VCO to the filter
E VCO 1 modulates VCO 2 which has a sawtooth wave. VCO 2 to VCF
F Noise to VCF, no oscillators
Usage:
in case of a TR-808, use the Trigger Outs of your TR-808 for each SY-1Channel.
in case of a ARP Sequencer, use the 8/2 function and trigger each SY-1 Channel
further you can try a clock divider or DIN-Sync to analog clock with a Clock divider.