Projecttitel: Antonus 2600Status:Startdate: 06/2022Duedate: 03/2023Manufacture link: tbaModwiggler : https://www.modwiggler.com/forum/viewtopic.php?t=275887&hilit=antonus |
Page change history
A2600FS-BOM-v1.2-buildlog.xlsx
rare Parts sources:
diysynth.de
antonus
ebay
Reverb Wiring
PSU
Speaker connector:
important the Amp needs 16V minimum
Balance out:
10k added here (bugfix in rev 1.0)
please note: the green jack is a stereo jack !!!
e
Transformer wiring:
maybe you have to use 2k epoxy glue to mount the IEC inlet (was needed for my IEC model)
I connected everything in this standard way:
IEC P and N (2 cables) to > Frontpanel power switch > 2 cables to transformer PCB input
IEC earth to transformer and frontpanel ground
PSU PCB output +15/0/-15V to mainpcb
PSU PCB 3x MTA100 with drilled cable to the VCOS ! important
PSU PCB MTA156 2pole to Amplifier (double check the polarity)
Internal notes:
Main A: v1.0