Projecttitel: Arp2612 FilterStatus:Startdate: 21.October 2014Duedate: 31.December 2014Manufacture link: |
Muffwiggler link: http://www.muffwiggler.com/forum/viewtopic.php?t=121124&postdays=0&postorder=desc&start=80
Building guide: 2612_BuildDoc.pdf
i go forward to use a 2n3958 like the original instead of 2x2n5459, in building guide " there are markings for usage of 2n3958"
Parts/BOM (listed only non standard parts)
pcb (control and main pcb from steffcorp
1x tempco 1k87
2x1n5817
1x lm301 dip8
4x 3k32
1x 23k2
1x 196k
2x 250R trimpot multiturn or 500R trimmer
1x 10k trimpot multiturn
1x 100k trimpot multiturn
Panel 4072 panel from Bridechamber.com, you have to leave the fine tune pot
copy from https://steffcorp.se/product/2612/
This is a clone of the 4012 VCF used in the ARP 2600.
Other than some substituted parts and a “sandwich-layout” mainly adjusted for the eurorack standard, I have tried to keep all the original quirks as close to the original as possible.
The “sandwich-layout” simply means the VCF is split in 2x PCB’s mounted in parallel on top of each other.
The Core-PCB contains the main circuit, while the Control-PCB contains the controlling elements as well as the buffers.
See the Build-Document for more detailed info/options regarding the build.