Project
Projecttitel: ISE-NIN
Status: IN PROGRESS
Startdate: 26th Aug.2022
Duedate: 15th Sep.2022
Manufacture link: https://black-corporation.com
This page is reserved for the build-guide
BOM: (not final approved by me yet but it matches for sure 99%)
Issue: the Trimmer part number from mouser isn't correct,
the Case and Panel can be ordered with the PCB set
Note for builders:
- You need experience in soldering SMT Parts (around 350 SMT capacitors and 24 ICs in SOIC format).
- Tools are required: Soldering Station, Flux pen, magnifying Glasses, Oscilloscope, some pliers, tweezers, PC or Mac for installation of the boot loader and firmware
- Its preferred to have a bench power supply with current limiter for first test
- the programming is made by a ST-link programmer which is in the BOM (in case of DDRM builders - you can use the existing programmer)
Current identified Errors/Omissions/Errata:
Date | Location | Type | Identified issue | Resolution | related for development | affected PCB version | fixed Version |
|---|---|---|---|---|---|---|---|
| 30 Aug. 2022 | Voices | ERROR | the Trimmer Mouser part number is invalid | Line 180: 652-3296X-1-103RLF | BOM update needed | -- |