| Panel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Projecttitel: DINSYNC RE-303Status:
Startdate: 2016Duedate: 09/2018last update : 02/2023Manufacture link: http://privat.bahnhof.se/wb447909/dinsync/re-303/Forum : http://23.235.199.139/~re303c5/forum/ |
...
the blue cable connects ground from MIDI out to the MIDI IN jack.
Battery Tray - optional
You will need 5x 1.2V AA batteries, get the ones from IKEA, they're from the same factory as the Eneloop ones but for a fraction of the cost.
...
It is important to fit a 10 Ohm resistor as in this photo.
View file
DIN JACK Connector with integrated switch
assembled versions are here:
Switching+DIN+Sync+Jack+Assembly+&+Installation.pdf
or create your own by 3D print it (SLA)
Switching DIN Sync Jack - housing.stl
Switching DIN Sync Jack - actuator.stl
- Switch: Alps Alpine SPVQ910205
- DIN 5 Jack: Multicomp PSG03463
my own VCF Resonance modification:
the underlined lines are the value which I installed, you should use milled ic pins to make testing and replacement to your favorite sound easier
Random pics:
