Page History

"As Synthtopia reports, the Kijimi is inspired by the sound of the RSF Polykobol, a rare French polysynth from the late ’70s that was only available in very limited quantities. According to Instagram posts from Black Corporation, the synth will be available both pre-built and as a DIY kit."

source: http://www.factmag.com/2018/04/03/black-corporation-kijimi-synth/

the KIJIMI Synthesizer is a product of the Black Corparation located in Tokio.

It´s available in 2 different Version:

•   DIY Kit contains 12 PCBs (mostly THT)     https://www.deckardsdream.com/product/kijimi-kit-preorder-run1   (total costs for the pcbs are: $999)
•   Preassambled with Case ready to use    https://www.deckardsdream.com/product/kijimi-built-preorder-run1    (total costs: $3749)

The DIY kit consists of 12 PCBs:

• frontpanel board
• motherboard
• 8x voice cards
• power supply board
• connectors board

The motherboard has the MCU and DACs (digital to analogue converters used to control the analogue circuitry) preinstalled, the remaining parts you have to buy yourself from a local supplier. Some DIY shops will provide full parts kits.

Most of the remaining parts are thruhole, except for power filtering ceramic capacitors, which are large (0805 size), all same value (0.1uF) and located on the opposite side of the thruhole parts on the PCB.

The frontpanel and rack case will be supplied by DIY HUB.

please respect your local requirements/laws for a powersupply  (110V AC/ 230V AC) and

doublecheck the power input jack polarity (inside +) and

the diameter of 2.1mm or 2.5mm of the plug/jack  or you learn it in the hard way