its only for the rev.6b (its printed on the PCB - left hand to the DC-DC converter)
Download:
1601_rev6b_v1.1.xlsx (checked against one build by me)
Mouser: (not approved) but contains the most parts as we use in rev.5-6 with some changes from me, it must be 99% perfect.
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=857be93ec1
don't miss to order a powersupply - wandwart 12V DC 500mA or more
if mouser is out of stock:
PTL60-15O0-104B2 without center detent
or with red led:
internal note:
17x G-628S-0001 gateswitch and SW22
1x GF-642-6010 4PDT switch. (SW4)
2x 629-GF-326-0001 SW2 and SW21
for Patricks Custom case: add 2x 30mm M3 Spacer (female-female)
you also need screws for the side panels: 10x M3 10mm
Don't miss to order the Clock Divider Parts