...
| ID | Type | Description | ||
|---|---|---|---|---|
| 1 | BUG | Slider connected to PCB mainboard | use tape or remove the slider metal - or bend it |
|
| 2 | Documentation | some Infos are missing... Pinout mainboard | Circle on mainboard - capacitors is positive the square pads show the + pole |
|
| 3 | Documentation | Vactrols | use 5C/3-2 instead of 2 single | |
| 4 | BUG | Pot 17 on mainboard (alpha 9mm) the pin of the foot is against one trace. | isolate the pin with double layer tape or similar isolation |
|
| 5 | power connection: |
| ||
| 6 | testing process | to test card 1-4 | install card 12 - because it connects Q-N | |
| 7 | testing - general | new card12 from boops | connect Q-N together jumper the in/outs |
|
| 8 | for card 10 and 11 | connect the VTL5C3/2 as shown |
| |
| 9 | Calibration notes | install pinheader to test/select but this values works in a 208R and 208P perfect | Card6 Mo range: R9 must be 330k (instead of 240k) Card6 1-1.2V/oct R5 must be 82K (instead of 190K) Card7 R14 68k instead of 120k |
