...
http://23.235.199.139/~re303c5/forum/topic/1276-some-hints-from-building-my-re-606/
- Mainboard
- CR97 -> R97(4k7) and use C110 (1NF parallel)
- Tom board:
- CR305 -> R305 (4K7) and use C329 (1nf parallel)
- CR308 -> R308 (4K/) and use C330 (1nF parallel)
- The jumper wire strip from the alpha BOM was slightly too short, looks like it was updated in the latest BOM to 3 inch, but I would recommend maybe even getting the 4inch instead of 3inch :
- 571-FSN-23A-8 (Mouser)
- The scale switch - while this is by no means correct, this will work - just need to wire it to the board, and its quite small compared to the hole in the cases etc
- 611-SS-24E06-TG5P (Mouser)
...