Frontpanel for OLED (smaller cutout):
Screen cover for OLED version:
Rearpanel - for standard switch:
Screen cover for Schaeffer normal version:
Standard Panel Files: make sure there's a NOTE that you want 1.5mm thickness !!!!!!
PSU Option A
Solder a bridge at J71 between pin 2 and 3. (This connects V1 common pin to ground).
Solder a bridge at J72 between pin 2 and 3. (This connects V1 output pin to 9v supply lines).
Solder a bridge at J73 between pin 1 and 2. (This connects 5v from power socket/switch to 5v supply lines).
Solder V1, B1, C1, C2, C3, C4, C11, C12.